CT to 3D fragments · reduce, fit and plan on your own device
1 · Case
Everything happens on this phone or computer. The scan is never uploaded anywhere, and the app does not read the patient's name or ID from the files.
2 · Load the CT scan
Drop a ZIP file or the DICOM files here or choose below. CT works best; uncompressed DICOM is supported.
3 · Choose the series
For bone, pick a thin "bone" or "sharp" kernel series if there is one.
Prepare the model
Region to model
Yellow box = what will be built. Tighter boxes build faster.
From the front (side to side × head to foot)
Cross-section view (side to side × front to back)
Side to side
Front to back
Head to foot
Bone threshold
Red = counted as bone. Lower it for thin or osteoporotic bone; raise it if fragments stay stuck together.
Slice
Threshold 250 HU
Separate touching fragments
☰
Case
Tap a piece
touchingoverlapping
FRONT (AP)
SIDE
Controls
Pieces
Tap a piece to select it. 🔒 stops it moving; "bone" makes it a see-through background bone that the fit ignores.
Background bones see-through
Selected piece
Nothing selected
Split: for fragments that came out stuck together. Each tap separates more strongly. Join: for one bone that came out in parts.
Fine adjust
Directions follow the screen.
Move · step mm
Turn · step °
Fit and contact
Green = touching (within 1 mm). Red = overlapping. "Fit to…" tries many small turns and shifts around your placement and keeps the best contact. Bring the piece within about 5 mm first.
Views and 2D board
Front + Side views
2D board: the selected piece or group becomes the fixed base; others slide and spin flat
Measure
Tap 📏 Measure, then tap points on bone. Points stick to their piece and move with it, so lengths update live while you reduce.
No measurements yet.
Save and share
Positions belong to this model. Rebuild with the same series and settings before loading them again.
How to use
• One finger on empty space turns the view; + / - zoom. • ✋ Slide: drag the selected piece across the screen. ⟳ Turn: drag to rotate it about its own centre.
• ✌ Two fingers (when "2-finger: piece" is on): with Slide, move together to move, twist to spin, pinch to bring nearer or push away. With Turn, move together to tilt, twist to spin.
• ⧉ Front + Side: two X-ray-style views; slide in one, check in the other, as with the C-arm.
• 🧲 Fit to…: tap it, then tap the partner piece. 📎 Glue: tap it, then tap the piece to glue onto; glued pieces move together.
• ▦ 2D board: the selected piece becomes the fixed base and work goes flat, like puzzle pieces on a table.
• This is a planning aid built from the scan. Check every plan against the images and your own judgement.